Overview Top-Tier Cooling Fan: In the case of applying at T1, it will lower the decibel level to 55dB while still meet the cooling need. You can focus on your creations without distraction. Large Diameter of Air Duct: ...

T1 PEI 

Overview The screen of T1 is a 4.3-inch 480*272 touch screen, which is used to send commands to control the printer. Product Specification Screen resolution 480*272 Screen size 4.3 inches° Materials ABS, printed circui...

Overview The heating rod is the core component embedded in the heating block. When energized, it generates heat energy and quickly heats up to the set temperature to melt the printing material. Product Specification Quantity...

Overview The T1 nozzle uses a 0.4mm brass nozzle. Brass has good thermal conductivity, wear resistance and compatibility. And the nozzle is easy to replace. Installation Learn more about the replacement of the T1 Nozzle on Fls...

Overview The hot-end kit specially designed for high-flow extrusion consists of a nozzle, heating block, throat, temperature sensor, heating rod, and silicone sleeve.   Product Specification Max. Printing Temp. 300 ℃ Len...

Overview Filament Detector is used to detect and prevent blockage and abnormal flow conditions in printing material supply pipes, protect equipment and improve printing success rate. Product Specification Materials Metal、Pl...

Overview Both ends of the effector line are connected to the mainboard and the effector respectively, and are used to provide communication and power supply to the effector. Product Specification Plug Double-ended 9pin Leng...

Overview The heating block can provide enough heat to quickly melt the consumables and ensure sufficient flow parameters. Product Specification Quantity 3 pcs Materials Brass

Overview The motherboard plays a core role in controlling movement, temperature and data acquisition in 3D printing.   Product Specification Materials PCBA Color Green Product Size 132*67*15 mm Product Weight 0.2 kg  

Overview The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed. Com...