Overview Grease is used to lubricate line gauge, reduce friction, improve printing accuracy, extend the life of parts, etc.   Product Specification P/N 6020A N.W 10g Flash Point 200F/93C Temperature Range -50C to 200C    

Overview The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.7mm, and its outer diameter is 4mm. Please note that the PTFE tubes are consumables and are at risk of wear, as they ...

Overview The driver board of the Flsun S1 motor is located on the side of the motor and is responsible for the operation and micro-step control of the motor. Product Specification Materials PCBA Color Green  

Overview The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed. Com...

Overview The motors are three identical stepper motors installed on the top above the three axes of the printer, used to drive the tool head to move in the XYZ direction. Includes motor , motor cable and synchronized wheel. Pr...

Overview The motherboard plays a core role in controlling movement, temperature and data collecting in a 3D printer. Installation Learn more about the replacement of the motherboard for S series S1 Printers on Flsun Official W...

Overview Limit switches are critical components to ensure that the print platform or print head remains in the correct position when homing. Product Specification Materials PCBA Color Green Product Size 30*15*12 mm Produc...

Overview The energy storage board provides backup power to cope with power interruptions or instability. It can also balance the power supply, recover energy and serve as system backup to ensure the function of resume printing ...

Overview The drying chamber cable is an 11pin cable used to connect the effector and the motherboard. Product Specification Plug Double-ended 11pin Length 400mm    

*Only applicable to the S1 3D printer.

Overview The light strips are installed on both sides of the printer, one on each of the X and Y axes. Provides illumination inside the printer cavity, and there is a cable interface on one side of the light strip for connectio...