Overview The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed. Com...

Overview The S1/S1 Pro parallel wall is made of high-precision carbon fiber, which is driven by motors to drive the precise movement of each arm, thereby achieving precise printing. Product Specification Quantity 3 pcs Lengt...

*Only applicable to the S1 3D printer.

Overview The drying box fan is located inside the drying box and is mainly used to circulate the air in the box to ensure uniform distribution of temperature and humidity; increase the flow speed of the air to accelerate the dr...

Overview Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...

Overview The camera is used to determine whether any abnormal problems occur during the printing process and alarm in time. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions...

Overview The control board fan (4010) is located inside the upper case and is used to cool the motherboard and driver board to prevent the board from shutting down due to overheating. Product Specification Voltage / Operati...

Overview The drying box will absorb the humidity in the air to keep the consumables dry, ensuring that the printing effect will not be affected by the status of the consumables.   Product Specification Color Black Package...

Overview The drying box board is the main board of the drying box and is responsible for implementing functions related to the interior of the drying box, including weighing consumables, drying consumables, etc., to ensure the ...

Overview The drying chamber cable is an 11pin cable used to connect the effector and the motherboard. Product Specification Plug Double-ended 11pin Length 400mm    

Overview The effector fan（2515） is located inside the effector and is used to cool and reduce the temperature of the throat to prevent the consumables from softening or clogging during the melting process of the throat. The fan...